As a domestic giant, Huawei's mobile phone has surpassed Apple in the minds of Chinese people. Below we dismantle the previous generation of the flagship Huawei P30 Pro to learn about the manufacturing process of domestic mobile phones and see why Huawei mobile phones are so powerful.
After the machine is turned off, the card slot is removed. The card slot is at the bottom of the fuselage. The double Nano-SIM design is made of plastic + metal structure; the inner side is dustproof and waterproof, and supports the NM card expansion storage.
The gap; insert the disassembled piece, then heat the sides and the top, and smoothly separate the back cover.
The periscope telephoto lens in the back cover occupies a large space, and the whole is reinforced with a piece of metal, which increases the structural strength of the rear view. The left side of the lens is the opening of the flash and ToF; there is a buffer foam in the middle. The lower right corner is a graphite heat sink.
It is an NFC antenna. It has 4 cameras + flash on the upper left side. The middle ring shape is a wireless charging module with a heat dissipation layer placed above the battery.
Remove the 10 screws that secure the motherboard cover, then tear off the heat-dissipating film on the bottom, remove the cover, and have a heat-dissipating film in the chip area. The cover has an NFC antenna and a 15W wireless charging module in the corresponding area.
Below the cover is the battery, first pick up the battery BTB to power off, and then pick up: main FPC, type-c port, screen, telephoto, ToF lens, main camera, wide-angle and proactive BTB.
Take out the telephoto lens assembly, which can have a camera with 8 million pixels, an aperture of f/3.4, and a periscope structure that achieves 5x optical zoom, equivalent to 125mm.
xx然后取出主摄像头组件，集成了ToF和广角镜头，主摄像头是4000万像素索尼IMX650，或者是Quard Bayer阵列，只有滤镜改为RYYB，这样做的目的是为了改造夜晚视觉装置，这个然而，P30 Pro有一个独特的作弊。